Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen PDF herunterladen (Seite 80)

66 Chapter 6 Adding moving lights to the show

Loading personalities into the console

You may load additional personalities to your show if you find that the

default personalities are not sufficient for your needs. Any personalities

loaded to your show are saved with your show.

Load personalities to your show from a diskette. If you obtained the extra

personalities from ETC’s internet website, store them first on your hard

drive, preferably in the Shows directory set up by Expression Off-Line.

See the Expression Off-Line QuickGuide for information about using Off-

Line to create and edit shows for your console.

When you are ready to load personalities to your show, transfer what you

need from your computer to a diskette. The console loads all files from the

diskette to your show at once. Follow the procedure below to load

personality files.

1. Insert the 3.5-inch diskette in the console disk drive.

2. From the Personality Setup display, Press [S1], From Disk, [Enter].

3. Remove and store the diskette when the transfer is complete.

WARNING

- If possible, always load personalities before patching. If you

try loading a personality with the same name as one you already have in

your show, you will get the warning shown below. If you are replacing a

personality with one that assigns more channels, the automatic

repatching will cause erroneous overlapping. Such overlapping can cause

unexpected or inconsistent behavior from recorded elements such as

groups and cues used in the show. You may need to repatch fixtures.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 379 380

Keine Kommentare

Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen Seite 80