Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen PDF herunterladen (Seite 56)

42 Chapter 4 Patching channels

Also, the Profiles display contains the following information:

• The profile’s number and name (if labeled - see Labeling Profiles

below).

• For each fade point, the percent of the fade complete at that point.

Each fade point contributes 5% to the total fade.

• For each fade point, the intensity at that point.

Note

: Use [At] to set the level with the keyboard or use [At] [+] or [At] [–]

to bump the level by one.

Creating or editing a profile

If you need a profile that is different from any of the ten provided, you can

either edit one of those that already exists (but not default profile 0) or

create a new one. As you edit, the profile changes to display the results.

Edit intensities in the Profiles display as follows:

Copying to another profile

One convenient way to create a new profile is to copy one of the existing

ones to a new profile number and edit the new one. Use softkey [S6],

Copy to Profile, in the Profile display to copy a profile.

Keystrokes:

Action:

1. Press [S1], Profile, [1][2]

[Enter].

Selects profile 12

Prompt reads:

Select percentage, then press [At]

to select level (Or, use right/left

arrows for percentage, up/down

arrows for level)

2. Press [S2], Percent, and

enter a fade point number.

Selects a fade point

3. Enter a new intensity on

the keypad.

Selects an intensity for the face point

4. Press [Enter] if finished or

go back to step 2.

Navigation and Feedback - Profiles display

[S]

Select a fade point XX X

Change the intensity XXX

Yellow numbers Fade point percentage

and intensity values

Yellow bar Fade percent point selected

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 379 380

Kommentare zu diesen Handbüchern

Keine Kommentare

Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen Seite 56

Kommentare zu diesen Handbüchern