Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen PDF herunterladen (Seite 37)

100

101

Express 125/250 User Manual, v.3.1 23

Setting the number of channels

You may find that in some circumstances you don’t need all the channels

available in your console. The system default is the maximum number of

channels the console can address. By reducing the channel count below

this maximum, you can significantly reduce processing time and free

console memory for other purposes.

If you plan to reduce the number of channels, note that when patching

fixtures you need one channel for every attribute in a fixture’s personality

(two channels for each 16-bit attribute). For example, a fixture’s

personality might require the assignment of 20 channels for the mix of

attributes and data types used by that fixture. If you patched five of those

fixtures, your console would need to provide 100 channels.

Follow these steps to set the channel count for your console:

Keystrokes: Action:

1. Press [Setup]. Selects Setup display

2. Select [1], System

Settings, and press

[Enter].

Selects System Settings menu

3. Select [2], Number of

Channels, and press

[Enter].

Prompt reads:

Select number of channels, then

press ENTER

Note: Fixtures require one channel

for every control output)

4. Press [1][0][0] to enter the

desired number of

channels.

Corner reads:

Chan 100

5. Press [Enter]. Number of channels is set to 100

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 379 380

Kommentare zu diesen Handbüchern

Keine Kommentare

Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen Seite 37

Kommentare zu diesen Handbüchern