Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen PDF herunterladen (Seite 99)

6 Setup 85

System Blocks

This setting enables or disables system-applied blocks. When enabled, if a channel level is

changed to match the channel level in a succeeding cue, Ion will apply a block to the channel levels

in the succeeding cue, thereby preserving the initial concept of a move instruction for that

parameter (see Block, page 146).

When disabled, the value in the subsequent cue will be changed to be a tracked value and the

move instruction will be removed. The default is “Enabled”.

Delete Confirm

This field allows you to enable or disable a required confirmation before any delete command is

executed. The default is “Enabled”.

Auto Save Interval

This setting defines the frequency of auto saves (when they are enabled). Time can be entered in

seconds (30) or minutes and seconds (10:30). Use the keypad to enter times and verify in the

command line that the timing value appears as you intended.

Back Time, Go To Cue Time, Assert Time

Each of these features allow you to change the respective feature response times based upon

parameter category. Each parameter category (Intensity Up, Intensity Down, Focus, Color, and

Beam) may have a specific time for each feature. The default for all times in these features and

categories is 5 seconds.

You can change all of these times by selecting the first available and pressing [Thru] followed by a

number of seconds and then [Enter].

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 337 338

Keine Kommentare

Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen Seite 99