Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen PDF herunterladen (Seite 108)

94 Ion Operations Manual

Setting Intensity

Channel intensity may be manually entered from the keypad, set with an intensity palette (if

programmed) or set with the level wheel. Pressing [At] after channel selection assumes an

intensity value will be added to the selected channels. You may also use the [Full] button to bring

the selected channels to their full intensity or you may use the [Out] button to fade the intensity out.

Use the [Level], [+%] and [-%] keys to affect the intensity value of selected channels. Each of these

keys are set at a specific value established in the Setup ({Manual Control}, page 86).

• [Level] is set by default to full (100% intensity).

• [+%] and [-%] are each set by default value of 10 points.

The following examples illustrate the various methods of setting intensity:

• [1] [+] [3] [At] [5] <0> [Enter] - selects channels 1 and 3, and sets an intensity level of 50%.

• [1] [thru] [5] [-] [4] [Full] [Enter] - selects a range of channels 1 through 5, except channel

4, and sets the intensity to full.

• [1] [thru] [8] [At] [+] [3] [Enter] - adds 30% to all intensities in the channel selection. If they

were at 50, they will now be at 80. If channels 1, 3, and 5, were at 30 and 4 was at 50, they

would be 60% and 80% intensity, respectively.

• [5] [thru] [8] [At] [/] [3] [Enter] - scales the intensities of the selected channels in the list down

30% of their current values.

• [1] [thru] [4] [At] [/] [1] [3] [0] [Enter] - scales the intensities of the selected channels in the

list up 30% of their current values. If channels 1 through 4 were at 40% intensity, this would

scale them up by 30% to a value of 52.

• [2] [+] [5] [level wheel] - roll the wheel up for greater intensity or down for less intensity.

• [1] [Level] - selects channel 1 and sets it to the level as established in Setup.

• [Group] [9] [Out] - selects all channels in Group 9 and sets the intensity values for those

channels to zero. The exception would be if any channels in Group 9 were parked or captured.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 337 338

Keine Kommentare

Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen Seite 108