Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen PDF herunterladen (Seite 309)

E Radio Focus Remote (RFR) 295

Change Frequency and ID Setting

A network ID is a separate digital channel on a single high frequency (HF) setting. Changing an ID

setting from the default “1” is useful when multiple systems are utilizing the same frequency.

To change the radio settings on your remote:

Step 1: With the remote power off, press and hold the [Chan /

Enter] button. Continue pressing it and power up the unit.

The display window will show the HF Channel selection

screen.

Step 2: Choose an HF Channel (1 - 12) by spinning either thumb

wheel.

• While setting the HF Channel, the RFR scans each available channel for traffic

which may interfere with the RFR. This feature is used to determine what

frequency to use in your venue.

• In the “Available:” field the RFR will display ***, **, * or “used”. The asterisks

indicate the quality of the signal at that channel. *** is best. “Used” indicates that

other traffic is detected on that channel, but the RFR may still function properly.

Step 3: Press {Next} ([s1]).

Step 4: Choose a network ID by moving either thumbwheel. Allowed range is from 1 to 99.

Step 5: Press {Next} ([s1]).

Step 6: Set the HF power level. This allows you to alter the strength of the transmission signal

from the remote. Allowed range is from +10 dBm to +18 dBm.

• A higher value indicates a stronger signal, but shortened battery life. A lower

value indicates a weaker signal and an extended battery life.

Step 7: Press {Save} ([s3]).

Step 8: Turn off the remote to apply the new settings.

Step 9: Turn on the remote when you are ready for its use.

To change the frequency and ID setting in your base station receiver with an Ion console:

Step 1: In the browser menu, select [File]<[Exit Ion]. A dialog box opens asking you to

confirm.

Step 2: Confirm this command by selecting {Yes}. The Ion application will close and the Eos

Configuration Utility (ECU) will display.

Step 3: Click the {Settings} button. A new settings dialog box will display.

Step 4: Click the {General} button and scroll down the list until you reach the “Remote Focus

Unit - Frequency” setting.

Step 5: Choose the appropriate HF setting from the drop down box (must be from 1-12,

matched with the remote).

Step 6: Scroll the general settings list until you reach “Remote Focus Unit - Group.”

Step 7: Choose the appropriate ID setting from the drop down box (must be from 1-99).

Step 8: Accept the changes by selecting the {Accept} button. To cancel changes select

{Cancel}. The next time you start the Ion application, Ion will automatically send the

new settings to any base station that is connected to the console.

Step 9: If you have any difficulty, reset the base station by disconnecting the USB cable from

the console and then reconnect it. This cycles power to the unit.

Note:

If you change the frequency and ID settings in the handheld remote you must also

change the frequency and ID settings to match in the base station.

Setup: HF EUR

Set HF Channel

Available: **

1 (2.410 Ghz)

Next Prev Save

1 2 ... 304 305 306 307 308 309 310 311 312 313 314 ... 337 338

Kommentare zu diesen Handbüchern

Keine Kommentare

Electronic Theatre Controls Emphasis Lighting Control System Spezifikationen Seite 309

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Electronic Theatre Controls Emphasis Lighting Control System