2
12. Cue Level timing and delays for Intensity Up and Intensity Down, Parameter
moves shall follow the Intensity Up time.
1. Follow or hang time
2. Link instruction
3. Loop value
4. Block and/or preheat
5. Curve
6. Label and note
7. Execute list to trigger other activity
13. Non-intensity channel parameters may be marked (preset using Automark.
Automark presets any parameter transitions in the cue just prior to intensity
becoming active. Automark may be disabled on a cue or cue part basis,
enabling a “live” move.
14. Any channel parameter may be stored with an effect instruction. These effects
may contain relative offsets from current value, or absolute instructions. Effects
may be progressive action or on/off states. Entry and exit behaviors shall
modify the channel parameters activity when beginning and ending the effect.
15. Update may be used to selectively add modified parameter data quickly to that
parameter’s current source. It shall be possible to update inactive record
targets. It shall also be possible to update back to the current source of the
move instruction without specifying that cue via Trace.
16. Recall From quickly pulls specified data from record targets into the current
view.
17. Copy To quickly copies selected data to specified record targets.
18. Address and channel check functions shall be provided.
19. Channel parameters may be “parked” at levels. Output addresses may also be
parted directly. Parked levels shall not be added to any live record operations,
nor may they be changed until the parked element is “unparked”. Address
park shall also be provided.
20. About shall provide detailed status of selected channels or specified record
targets, including utilization information. About shall also access lamp control
functions to calibrate devices, strike and douse arc sources. Use of a luminaire
control channel for these functions shall not be acceptable.
21. Live data may be displayed in an expanded table view containing conventional
symbols and table views for multi-parameter devices or in a summary view.
22. Undo shall be used to sequentially step back through manual operations,
record, update and delete actions. Redo functions shall be provided. Multiple
undo commands may be executed at once.
23. Home shall set selected channels non-intensity parameters to their default
values.
24. Move shall allow all show data to be moved from one record target to another.
(7) Blind
1. The Blind display allows viewing and modification of all record targets without
affecting stage levels.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern