Electronic Theatre Controls Emphasis Lighting Control System Bedienungsanleitung PDF herunterladen (Seite 117)

4 Live Editing 107

on the “Y/Level” wheel or the right half of the trackpad on your Facepanel. Rate

is placed on the “X/Rate” wheel or the left half of the trackpad.

Step 2: Move the wheels (or slide your finger up and down the appropriate side of the

trackpad) to adjust the size and rate of the selected effect(s). The “DE Not

Recorded” message will flash on screen to indicate that changes have been

made but not recorded. Also, in the Dynamic Effects Status display, a blinking

asterisk will appear next to the effect number that has been modified but not

recorded.

Step 3: Press [S8 - Dynamic Effects] to view the Dynamic Effects Status display.

Step 4: Press [n] [Enter], where [n] is the effect number, to view the adjusted dynamic

effect.

Step 5: Press [Record] [Enter] to record the adjustments back into the source

submaster.

Note:

You can also record the dynamic effect to a different cue number or to a submaster.

Sneak

With the sneak function, you can manually set direct levels over time. When you use the

[At], [Full], [Level] and [Release] keys, the new level takes affect immediately. When you

use the level wheel or trackpad, you may not fade to the new level evenly. If you need to

change channel levels, and you want the change to be smooth or go unnoticed (like in a

performance situation), you can use the sneak function to have channels assume new

levels (or restore to recorded levels) over a given period of time. You can use the default

sneak time, set in Default Sneak Time, page 53, or you can set the sneak time yourself.

Note:

You cannot sneak to a focus point, only to direct levels.

Set channel level using [S6 - Sneak]:

Step 1: Press <Stage>. The sneak softkey is only available in the Stage display.

Step 2: Press [S6 - Sneak]. This activates the sneak mode.

Step 3: Select the channels you want to sneak using the procedure described in Select

Channels, Dimmers and Fixtures, page 86. You do not need to press [Channel].

Step 4: Choose one of the following options:

• Press [Enter] to sneak the channels out, or to recorded levels, in the default

Sneak time.

• Press [Time] [y] [Enter] to sneak the channels out, or to recorded levels, in

the time [y].

• Press [At] [x] [Enter], to sneak to level [x] in the default Sneak time.

• Press [At] [x] [Time] [y] [Enter] to sneak to level [x] in the time [y].

Note:

To sneak all captured channels out or to their recorded levels in the default sneak time,

press [S6 - Sneak] [Enter].

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 317 318

Keine Kommentare

Electronic Theatre Controls Emphasis Lighting Control System Bedienungsanleitung Seite 117