Electronic Theatre Controls Source Four Revolution Bedienungsanleitung PDF herunterladen (Seite 6)

4 Source Four PAR User Manual

Step 4: Align the flat sides of the lamp base with the retention brackets on either side of the

socket as shown in Figure 3.

Step 5: Push down on the lamp base until the lamp seats firmly. When properly installed, the top

of the lamp’s base will be even with the top edges of the retention brackets.

Step 6: Press lamp retaining clip across lamp base to secure.

Step 7: Reinstall the lamp housing by aligning the bolt hole and tightening the knurled bolt.

Lens identification

Lenses for the Source Four PAR come in four versions. The type, or beam spread, can be identified

by the lens texture.

Changing a lens

Change lenses if they become cracked or badly scratched.

Removing a lens

Step 1: Place the fixture on a flat, stable work surface. Do Not remove or install lenses with fixture

hanging.

Step 2: Position the lens rotation ring with the spring clip at the top of the unit, directly below the

gel retaining clip. See Figure 1.

Step 3: Tilt the front of the fixture down at least 45°. See Figure 7.

Step 4: Press the spring clip with your finger to release the lens.

Step 5: Allow the lens to drop forward from under the clip.

Step 6: When the lens drops, remove your finger, allowing the lens to slide forward until it rests

on the lens catchers. See Figure 8.

Step 7: Carefully remove the lens.

CAUTION:

Improperly installed lamps cause premature lamp failure and socket problems.

CAUTION:

Never operate the fixture without a lens in place.

WARNING:

Unplug the fixture and allow it to cool down before attempting to change a

lens.

MFL

WFL

NSP

VNSP

Very narrow spot

Clear glass

15° Round beam shape

Narrow spot

Stipple glass (slight diffuse texture)

19° Round beam shape

Medium ﬂood

Fewer facets, sized 6 x 22mm

21° x 34° Oblong beam shape

Wide ﬂood

Many facets, sized 6 x 12mm

30° x 51° Oblong beam shape

XWFL

Extra-wide, or buxom, lens

Molded, borosilicate lens, multi-faceted

60° Round beam shape

(Optional)

Figure 6

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Electronic Theatre Controls Source Four Revolution Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Electronic Theatre Controls Source Four Revolution